Hand Held Digital Tachometer

Specifications

Measuement System:

Non-contact ------ Photo part and reflective tape (effective measurement distance between photo part and reflective tape; 50 to 300mm at light projection angle of within (+/-) 30 degrees, and tape size of 10 mm by 10 mm.)

In-contact ------- Touchless model with a contact probe (rubber tip or surface wheel) and an adaptor.

	TM-4000
Measuring Range:	30.0 ~ 30000.0 rpm
Resolution:	0.1 rpm
Accuracy:	±0.01% ±1 digit rmp·f/min (Others ±0.05% ±1 digit including tolerance of conversion)
Sampling Time:	1.0 ~ 2.0 sec.
Display:	Display: 6 digits LCD Battery alarm: B mark display Reflective light input: «= mark display Unit of diplay: rpm
Auto Poweroff:	After 3 minutes from last measurement
Data Hold Time:	Measurement date: 3 minutes until auto power-off
Measurement Method:	Contactless (Reflective tape is used) In-contact with an adaptor (Rubber tip or surface speed wheel is used)
Measurement Distance:	50 ~ 300 mm by reflective tape
Power Source:	4 batteries (AAA 1.5V) Continues measurement: 20 hours
Operating temperature:	5 ~ 40 C
Dimensions & Weight:	122 x 58(46) x 28 mm 140g

Includes:

Hand Tachometer: Tachometer Mainframe
Reflective Tape 10 sheets
Dry Battery (AAA 1.5V) 4pcs.
Instruction Manual

In-Contact Adaptor: In-contact Adaptor Mainframe
Rubber Tip 3pcs.
Surface Speed Wheel
(for x 1/10 m/min) 1 pc.
or (for x 1/10 y/min) 1 pc.

Remote Sensor (Optional): Ø 21, Max. length 1m

Names of Components

Hand Held Digital Tachometer

Optional:

Remote Sensor

"Measuring in Narrow Spaces is Easy using the Remote Sensor"

Hand Held Digital Tachometer

TO PRINT THIS PAGE